LT-AD01 2D Phased Array Radar + LT-UJ830Q Omni-Directional UAV Jammer (Optional)
Product Introduction:
The air defense radar produced by our company has a
three-coordinate all solid-statefully coherent and active
two-dimensional phase scanning system. The working frequencyband is
the X-band, and the whole device adopts a modular, all solid-state
design to ensurethe reliability of the equipment. The equipment is
used for high-speed target detectiontracking, and positioning.in
addition to meeting the rigidity and strength indicators, thedesign
also takes into account the layout, installation, wiring, cooling
and other requirementsof a large number of electronic devices.
The omnidirectional multi-band jamming antenna system adopts
multiple cylindrical spiral antennas, and its transmission
frequency band can almost cover the communication frequency band of
UAVs in the market, including 3 flat panel antennas and 1 PCB
antenna. It can effectively jam targets within the operating range
of the antenna, and the jamming range is determined by the
anti-jamming capability of the UAVs. This jammer adopts an
omnidirectional jamming system, which can effectively maintain the
airspace security of key areas.
Product Features:
1, Tracking multiple targets at the same time, real-time detection
of target speed, trajectory and spatial position.
2, Integration of a variety of anti-strong clutter algorithm.
3, Active phased array antenna to achieve full airspace coverage.
4, The device is small in size, light in weight and all
solid-state, with high stability and reliability.
5, The jammer adopts omnidirectional jamming system.
6, The pitch transmission section uses a worm gear transmission
which is self-locking in the event of a power failure.
7, The internal industrial grade (military grade optional) embedded
intelligent control system can realize the stable control of the
turnta
| Parameter Name | Parameter Value |
| Radar System | 2D Active Phased Array |
| Operating Frequency Band | X Band |
| Scanning Range | Azimuth(Electrical Scanning):±15.5° |
| Pitch(Electrical Scanning):±30° |
| Azimuth(Mechanical Scanning):0°-360° |
| Pitch(Mechanical Scanning):0°-90° |
| Antenna Speed | ≤10rpm |
| Detection Range(Pd=0.8,Pfa=10-6) | ≥8 km (RCS=0.01m²) |
| ≥15.5km(RCS=0.1m²) |
| ≥25km(RCS=1m²) |
| Blind Range | 240m |
| Resolution | Range Resolution:15m |
| Azimuth Resolution≥5° |
| Pitch Resolution≥9° |
| Accuracy | Range Accuracy≥20m |
| Azimuth Accuracy≥0.8° |
| Pitch Accuracy≥0.8° |
| Target Radial Velocity | 0.8m/s-100m/s |
| Target Tracking Capability | ≥200 Batches |
| Transmit Power | 256W |
| Front-end Equipment Size | ≤686mm*411mm*145mm |
| Weight | ≤55kg |
| Parameter Name | Parameter Value |
| Counter Mode | Radio Interference Suppression |
| Counter Target | UAV Image Transmission, Flight Control Links, Navigation Signals |
| Counter Frequency Band | 20-6000MHz |
| 400MHz,800MHz,900MHz,1.2GHz,1.5GHz,2.4GHz,5.2GHz,5.8GHz(Optional) |
| Counter Type | Omnidirectional Antenna |
| Counter Range | Full 360° Airspace |
| Counter Distance | 1.5-2km(Counter Range Varies by Model) |
| Counter Corresponding Time | 3s |
| Size | 550mm*500mm*300mm |
| Weight | ≤55kg |
| Power Consumption | Interference Switched On:960W |
| Ingress Protection | IP67 |
